Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Assessing the Potential of Ventilated Facades on Reducing a Buildings’ Thermal Load Using Decoupled COMSOL Simulations

J. van Schijndel[1], C. van Dronkelaar[1]
[1]Eindhoven University of Technology, Eindhoven, The Netherlands

Solar radiation is a prominent contributor of energy in buildings, and can be transmitted directly into a building through opaque surfaces, but it can also be absorbed by building components (i.e. walls, roofs etc.). This study discusses the use and effect of ventilated facades, with an ... En savoir plus

Numerical Characterizations of Visco-Plastic Behaviour of the TA6V with Metallurgic Phase Change

V. Bruyere [1], C. Touvrey [2], P. Namy [1],
[1] SIMTEC, Grenoble, France
[2] CEA DAM, Valduc, Is-sur-Tille, France

In order to predict the residual mechanical state of assemblies during pulsed laser welding, mechanical and metallurgical behaviors of materials need to be precisely characterized. Based on experimental data and analyses [1], a numerical model is developed in COMSOL Multiphysics® ... En savoir plus

On The Modelling Of Electrowetting Using COMSOL Multiphysics

J.F. Dannenberg, J. Brinkert, and E.A.D. Lamers
Reden b.v., Hengelo (ov.), The Netherlands

One of the upcoming technologies in displays is that of the electrowetting displays. A surface can be covered by a colored oil or transparent water using a voltage to increase or decrease the wettability of the surface. A simulation of the behavior of such a thin film of oil in water, ... En savoir plus

Creep Deformation Behavior of Heating Filaments in High Temperature Applications

B. Valentini [1],
[1] Plansee SE, Reutte, Austria

Resistive heating filaments used in high temperature applications at 2000°C and above are often made of refractory metals. The lifetime of such filaments is mainly limited by creep deformations which can in the worst case lead to a short circuit between filaments and other furnace ... En savoir plus

Effect of Groundwater Flow on the Subsurface Temperature within Crystalline Rocks of Southern Norway

Y. P. Maystrenko [1], O. Olesen [1],
[1] Geological Survey of Norway (NGU), Trondheim, Norway

The subsurface thermal regime has been investigated in boreholes from southern Norway. During the purely conductive 2D thermal modeling, the COMSOL Heat Transfer for Solids interface has been used to simulate heat transfer by heat conduction. COMSOL physics interfaces Heat Transfer in ... En savoir plus

Biosimulation of Normal Pressure Hydrocephalus Using COMSOL Multiphysics^®

K. Shahim[1], J-M. Drezet[1], J-F. Molinari[2], S. Momjian[3], and R. Sinkus[4]

[1]LSMX, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
[2]LSMS, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
[3]University Hospitals of Geneva and University of Geneva, Switzerland
[4]Waves and Acoustics Laboratory, ESPCI, Paris, France

A numerical finite element model of one human brain is built in COMSOL in order to study a particular form of hydrocephalus, the so called Normal Pressure Hydrocephalus (NPH). The geometry of the ventricles and the skull is obtained by Magnetic Resonance Imaging (MRI) and imported in ... En savoir plus

Molecular Gas Flow in a Fish Trap Nozzle – Challenge to the Second Law of Thermodynamics

R. Eisenschmid[1]
[1]OPTIMA pharma GmbH, Schwäbisch Hall, Germany

During examination of molecular gas flow in freeze dryers in near-vacuum properties, an idea came up to model a molecular fish trap nozzle. An appropriate shape of this fish trap nozzle allows to separate free flowing molecules into 2 chambers, and obtain a pressure gain in a isothermal ... En savoir plus

Design of MEMS based Polymer Microphone for Hearing Aid Application

V. S. Nagaraja[1], Ramanuja H. S.[1], Deepak K[1], S. L. Pinjare[1]
[1]Electronics and Communication Engineering, Nitte Meenakshi Institute of Technology, Bangalore, Karnataka, India

In this work, a MEMS based condenser microphone [1,2] using Polyimide as the diaphragm has been designed. The microphone structure has a backplate placed on top of the diaphragm. The backplate and the diaphragm are made up of polyimide. The two polyimide plates are separated by air gap ... En savoir plus

2D Axisymmetric Simulation of the Electrochemical Finishing of Micro Bores by Inverse Jet Electrochemical Machining

M. Hackert-Oschätzchen[1], M. Kowalick[1], G. Meichsner[2], A. Schubert[1], B. Hommel[3], F. Jähn[3], M. Scharrnbeck[4], R. Garn[5], A. Lenk[5]
[1]Professorship Micromanufacturing Technology, Technische Universität Chemnitz, Chemnitz, Germany
[2]Fraunhofer Institute for Machine Tools and Forming Technology, Chemnitz, Germany
[3]SITEC Industrietechnologie GmbH, Chemnitz, Germany
[4]SITEC Automation GmbH, Chemnitz, Germany
[5]Continental Automotive GmbH, Limbach-Oberfrohna, Germany

In this study the inverse Jet-ECM process of micro bores is investigated by help of multiphysics simulations. Based on the micro bore of a commercial sample nozzle a model geometry was derived. For simulating inverse Jet-ECM a transient model has been developed. Electric currents and ... En savoir plus

Lithium Ion Battery Thermal Safety and Prevention Measures

Qingsong Wang [1]
[1] University of Science and Technology of China, Hefei, China

Lithium ion battery safety problem has attracted the whole world’s attention essentially after the explosion of Samsung Note 7. This work mainly deals with the study of the generation, characteristics and prevention measures of the battery fire. Firstly, the heat generation rate of ... En savoir plus

Premier

141–150 of 223

Dernier