Consultez les proceedings de la Conference COMSOL 2024
In this work, a MEMS based condenser microphone [1,2] using Polyimide as the diaphragm has been designed. The microphone structure has a backplate placed on top of the diaphragm. The backplate and the diaphragm are made up of polyimide. The two polyimide plates are separated by air gap ... En savoir plus
For the SAFARI Imaging Spectrometer, part of the SPICA satellite payload, a Calibration Source is under development. Challenges in the design include the low cooling power (few mW) available at cryogenic temperatures. COMSOL Multiphysics® simulations were used extensively in the design ... En savoir plus
The Thomson coil’s (TC) inherent characteristics are appropriate to meet the needs of high speed actuators for mechanical switching devices in so-called smart grids. This is due to the massive forces that it can exert in the time scale of milliseconds. A coupled COMSOL Multiphysics model ... En savoir plus
Introduction: Medium voltage reclosers are representing nowadays an important link between transmission power systems and low voltage grids. With a high level of renewable energy penetration, the medium voltage networks are becoming bidirectional. Therefore, the associated switching ... En savoir plus
The accurate estimate of values of electromagnetic parameters are essential to determine the final circuit speeds and functionality for designing of high-performance integrated circuits and integrated circuits packaging. In this paper, the quasi-TEM analyses of symmetrical triple coupled ... En savoir plus
A model utilizing interdimensional variable coupling is presented for simulating the thermal hydraulic interactions of the High Flux Isotope Reactor (HFIR) core at Oak Ridge National Laboratory (ORNL). The model’s domain consists of a three-dimensional fuel plate and a two-dimensional ... En savoir plus
Subduction processes have great importance as are related to volcanism and earthquake occurrence. Old and cold plates should subduct steeper than younger ones, but the subduction angle is highly variable and does not always correlate with the age of the plates. Some researchers propose a ... En savoir plus
In this work the influence of the geometry of the Vickers indenter tip on relevant indentation properties is investigated during instrumented indentation operated in the macro range (i.e. with forces ranging from 2 to 200 N) and carried out in the case of a homogenized (i.e. heat ... En savoir plus
The microstrip line is widely used as the planar transmission line in microwave integrated circuits and high speed interconnecting buses. In this paper, we use COMSOL Multiphysics® to study multiconductor microstrip systems on microwave integrated circuits. We specifically illustrate ... En savoir plus
Research at Fraunhofer EMI addresses the response of materials in extreme dynamic loads. Besides mechanical or thermal loads, intense electric pulse currents also represent an extreme dynamic load. Experimentally, metallic samples, mainly thick wires, were electro-mechanically loaded ... En savoir plus