- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Closed loop geothermal systems (CLGS) are continuous energy systems that rely on the earth’s constant temperature deep beneath the surface. Pipes, filled with liquid, are drilled down deep into the earth and heated by hot rocks as they run horizontally underground. The heat from the ... En savoir plus
The semiconductor and IC package manufacturer are continuously seeking for miniaturization devices to fix into a small space. An unfortunate miniaturization of devices will have an effect on heat dissipation density, which leads to low rate of heat dissipation to the ambient. As a ... En savoir plus
A bolt connection can be modeled and simulated in different ways. In many engineering cases, only the stresses in and the contact pressure between bolted parts of an assembly are of interest. Here in this work, a bolt with thread and matching screw nut has been modeled in 3D in order to ... En savoir plus
Thermally conducting but electrically insulating materials are needed for heat-sink LED lighting applications. We report on a cost effective and innovative method based on creating core-shell nanoparticles in polymer with aluminum (Al) nanoparticles as the high thermal conductivity core ... En savoir plus
Laser powder bed fusion (LPBF) is one of the most beneficial manufacturing methods for its precision and ability to create parts with complex geometry, although high thermal gradient due to the considerable temperature difference between ambient and peak temperature appeared during laser ... En savoir plus
COMSOL Multiphysics® coupled with Solidworks® is employed to design, simulate and fabricate cartridges for a materials printer to accomplish in-situ curing of UV curable ink patterns as they are printed on flexible media for printed electronic circuit manufacturing. The cartridges ... En savoir plus
Started in March 2020, the SOFITT project (Saturated Open-Cell Foams for Innovative Tribology in Turbomachinery), funded by the ANR (French National Research Agency), aims to develop reliable, high-performance, and environmentally friendly solutions for the guidance and support systems ... En savoir plus
Activated carbon filtration has proven to be a reliable method to clean indoor air. In such a system, air, contaminated with VOCs, is led through the filter where the contaminants are adsorbed onto the filter. However, for the long term stability of the air purification system, it is ... En savoir plus
Obtaining a good coverage of Digital Audio Broadcasting (DAB) service, in the 200 MHz band, in motorway tunnels is quite a challenging task. Recently, Rai Research Centre (CRITS) has been involved in investigating alternative (and cheaper) solutions than those adopted so far (radiating ... En savoir plus
Geological repository for highly radioactive waste disposal is a system of engineered and natural barriers. The objective of this system is to contain and isolate waste and protect the environment and humans from ionizing radiation. For the evaluation of performance of engineered ... En savoir plus