- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
An ion trap resonator, used for mass spectrometry, is investigated. Simulations are used to define the stabilization criterion of ion trajectories by optimization of the electrode configurations. The ion interactions are investigated and shown to help in reduction of ion-diffusion. Space ... En savoir plus
Introduction: Recently, Li-ion battery is being widely used as power source for various applications from electronic gadgets to automotive industry. The performance and cycle life of Li-ion battery are becoming gradually important issues as the applications are shifting from small scale ... En savoir plus
Introduction: Lithium-ion batteries are widely used as power sources for portable electronic devices (laptop, phones, and players) and electric cars due to their high energy density. New applications, such as Formula E, require also a huge power capability that the iron-phosphate-based ... En savoir plus
Chlorine reactor is used to dry molten LiCl-KCl eutectic salt before it is put to use in electrorefining operation. Molten salt electrorefining is a pyrochemical method of separation of heavy elements from spent metallic nuclear fuel. It is a high-temperature process which uses molten ... En savoir plus
Large format Li-Ion battery cells (LIBC), often employed in electric vehicles (EV), show notable gradients in current and temperature distribution. This inhomogeneity can influence the cell’s safety and accelerate battery aging. It is, however, difficult to determine the local ... En savoir plus
INTRODUCTION: Active cooling systems represent a possible solution to the electronics overheating that occurs in downhole tools operating on wireline, a cabling technology used to remotely control the downhole devices during oil and gas well interventions, in high temperature wells (150 ... En savoir plus
In ground-coupled heat pumps (GCHPs) the coupling between heat pumps and ground occurs by means of ground heat exchangers, that can be installed vertically inside boreholes (BHEs) or horizontally (HGHEs). In the horizontal installation, the heat exchangers are placed in shallow trenches ... En savoir plus
Natural convection has to be accounted and simulated for in order to properly describe the physics encounter in the phase change process. A simplified two-dimensional model was created in COMSOL 4.1. Natural convection was accounted for by adding a volume force and using the Boussinesq ... En savoir plus
A 1D phase change problem, known as Stefan’s problem, for which analytical solutions are available, is solved as a 2D problem using COMSOL Multiphysics. The PCM medium is semi-infinite, initially solid at its melting temperature Tm, and at t = 0, the wall temperature is raised to Tw > ... En savoir plus
The ubiquitous commercial use of Lithium-Ion batteries (LIBs) has increased interest in their implementation into efficient energy storage systems for clean and renewable power sources and the electrical transportation industry. Unfortunately, LIBs are not yet technological mature to ... En savoir plus
