- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
随着电磁波应用功率的提高,大功率环形器的电磁损耗不可忽视,并造成环形器在工作过程中发生温度变化,导致环形器性能出现不稳定状态。针对大功率环形器在工作过程中温度变化对性能的影响,利用COMSOL Multiphysics多物理场耦合仿真软件,对大功率微波环形器进行3D建模,并在该模型基础上,对电磁场、固体传热和固体力学进行多物理场之间的耦合仿真,最终得到大功率微波环形器在工作过程中的电磁分布情况、损耗情况、温度分布情况以及结构参数等发生的一系列变化,并进一步考虑风冷及饱和磁化强度参数对大功率微波环形器性能的影响,为大功率环形器的综合设计提供理论依据。 En savoir plus
Plasmonic nanoparticles have received increased interest due to their numerous potential applications in the field of optics and optoelectronics. Currently such metallic nanoparticles are applied in semiconductor devices, such as light emitting diodes (LEDs) and solar cells. The optical ... En savoir plus
The use of high power microwave energy for ablation of contaminated concrete is a promising technique to speed up the dismantling of nuclear power plants. A coupled simulation using COMSOL Multiphysics® finite element software is performed by solving the electromagnetic wave equation at ... En savoir plus
We report an implementation of parallel computing on Amazon Web Services™ (AWS) for touch-sensor modeling. COMSOL Multiphysics® was used to simulate an electromagnetic field distribution in a capacitive sensor assembly. Multiple COMSOL jobs were deployed on separate AWS instances and ... En savoir plus
Realization of an efficient coupling between photonic sub-micrometer size modes and hundred micrometer wide free-space beams remains a main engineering hurdle to a wider acceptance of miniaturized chip-scale atomic and bio systems. The major obstacle comes from a gigantic mode mismatch ... En savoir plus
We present here our work on deconvolution of a magnetic probe to mesure electromagnetic emissions in near-field zone. To achieve this work,we have chosen a rectangular waveguide (WR90) as a radiating structure.Theoritical near-field is simulated using a FEM software (COMSOL) and also ... En savoir plus
This paper presents the electromagnetic analysis of an all-superconducting synchronous electric machine, focusing on AC loss calculations in high temperature superconducting (HTS) coils. The numerical analyses of two 3D models are shown, including the model of the machine and its HTS ... En savoir plus
Localized convection heat and mass transfer can be intensified and optimized by providing exposure to electromagnetic energy. Conjugate heat and mass transfer are configured by solving the momentum, heat and mass transfer simultaneously in both solid (substrate, comprising of a two-phase ... En savoir plus
Volatile organic compounds (VOCs) are a large group of chemicals that can be found in many products that we use to build and maintain our homes. Some of the VOCs such as benzene, formaldehyde, ethylene glycol, etc. can be found in our everyday life in the form of paints, cleaning agents, ... En savoir plus
We have developed Thor: a pulsed power accelerator for performing dynamic material experiments. The design was aided by using the COMSOL Multiphysics® software with the AC/DC Module and RF Module. Our design process involved optimizing the impedance of the system while maintaining a good ... En savoir plus
