Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Seeding Distribution in the Channel of a Cell Culture Vessel

J. Brcka [1], K. Kagawa [2], S. Ozaki [2], Y. Oshima [3], G. Zhang [4],
[1] Tokyo Electron U.S. Holdings, Inc., Austin, TX, USA
[2] Tokyo Electron, Technology Development Center, Chuo-ku, Kobe, Japan
[3] Tokyo Electron Europe LTD, Stem Cell Technology Centre, Stevenage, United Kingdom
[4] Clemson University, Rhodes Engineering Research Center, Clemson, SC, USA

Conventional cell culture (CC) techniques are advancing significantly with a trend towards a mass production. While plating density (number of cells per volume of culture medium) plays a critical role for some cell types, the initial distribution of these cells is affected by the actual ... En savoir plus

Improvements in the Modeling of the Self-ignition of Tetrafluoroethylene

M. Beckmann-Kluge, F. Ferrero, V. Schröder, A. Acikalin, and J. Steinbach
Federal Institute for Materials Research and Testing, Technical University, Berlin, Germany

Tetrafluoroethylene (TFE) is a gas widely employed in industry, which can under specific circumstances experience an exothermic dimerization to octafluorocyclobutane. If the heat generated by this reaction cannot be dissipated to the surroundings, the temperature inside the reactor will ... En savoir plus

Biosimulation of Normal Pressure Hydrocephalus Using COMSOL Multiphysics^®

K. Shahim[1], J-M. Drezet[1], J-F. Molinari[2], S. Momjian[3], and R. Sinkus[4]

[1]LSMX, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
[2]LSMS, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
[3]University Hospitals of Geneva and University of Geneva, Switzerland
[4]Waves and Acoustics Laboratory, ESPCI, Paris, France

A numerical finite element model of one human brain is built in COMSOL in order to study a particular form of hydrocephalus, the so called Normal Pressure Hydrocephalus (NPH). The geometry of the ventricles and the skull is obtained by Magnetic Resonance Imaging (MRI) and imported in ... En savoir plus

Simulation Enquiries on Energy Transfer Efficiency in Stored Fluids

E. Zinterl, and G. Jakopic
JOANNEUM RESEARCH Forschungsgesellschaft mbH,
MATERIALS-Institute for Surface Technologies and Photonics
Weiz, Austria

Heating or cooling of stored fluids by thermal energy exchange with the enclosing walls may be enhanced by improving the efficiency of energy transfer; energy loss to the ambient is equalized for all simulations. Buoyancy driven internal natural convective flow is assumed to be the main ... En savoir plus

Flow Focusing Droplet Generation Using Linear Vibration

A. Salari[1], C. Dalton[1]
[1]Department of Electrical & Computer Engineering, University of Calgary, Calgary, AB, Canada

Flow focusing microchannels are widely used in droplet generation mechanisms. In this paper, the effect of linear vibration on the flow pattern in a flow focusing structure and the corresponding formed droplets were numerically investigated using COMSOL Multiphysics® software. The ... En savoir plus

Multiscale Modeling of Polymer Crystallization

R. Spina[1], M. Spekowius[2], C. Hopmann[2]
[1]Dept. of Mechanics, Mathematics and Management (DMMM), Politecnico di Bari, Bari, Italy.
[2]Institute of Plastics Processing (IKV), RWTH Aachen, Aachen, Germany.

The manufacturing of high quality injection molded parts requires a deep understanding of material properties, process parameters and product design. The behavior of a polymer during the injection molding process and the performance of the final part are strongly determined by the ... En savoir plus

Full Coupling of Flow, Thermal and Mechanical Effects in COMSOL Multiphysics® for Simulation of Enhanced Geothermal Reservoirs

D. Sijacic[1], P. Fokker[1]
[1]TNO, Utrecht, The Netherlands

The effective modeling of enhanced geothermal systems (EGS) requires the coupling of geomechanics, fluid flow and thermal processes. An understanding of the complete system with these coupled processes is vital, not just for reservoir stimulation targeted at enhancing reservoir ... En savoir plus

Determination and Verification of the Forchheimer Coefficients for Ceramic Foam Filters using COMSOL CFD Modeling

M.W. Kennedy[1], K. Zhang[1], J.A. Bakken[1], R.E. Aune[1]
[1]Norwegian University of Science and Technology, Trondheim, Norway

Experiments have been conducted with water at velocities from ~0.015-0.77 m/s to determine the permeability of 50 mm thick commercially available 30, 40, 50 and 80 Pores Per Inch (PPI) Ceramic Foam Filters (CFF) used for liquid metal filtration. Measurements were made using two different ... En savoir plus

Numerical Study of Droplet Formation inside a Microfluidic Flow-Focusing Device

Y. Li[1], M. Jain[1], K. Nandakumar[1]
[1]Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA, USA

The micro-nanometer sized droplets have tremendous applications in bio-diagnostics, polymerization processes etc. In this work, we numerically investigate the droplet formation process of silicone oil in aqueous solution in a MFF device. A conservative level-set method is adopted to ... En savoir plus

Modeling of Expanding Metal Foams

B. Chinè[1,2], M. Monno[3]
[1]Laboratorio MUSP, Macchine Utensili e Sistemi di Produzione, Piacenza, Italy
[2]School of Materials Science and Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica
[3]Politecnico di Milano, Dipartimento di Meccanica, Milano, Italy

Metal foams are interesting materials with many potential applications. They are characterized by a cellular structure represented by a metal or metal alloy and gas voids inside (Fig.1). A common metallic cellular material is aluminum foam which can be produced metallurgically by heating ... En savoir plus

Premier

411–420 of 543

Dernier